Request Appointment
  • Date Format: MM slash DD slash YYYY

Installing a French Drain (Part Two)


Now that you’ve identified a good location for your drain, it’s time to get started. Before you start digging, mark the area extending from your rain gutter for your French drain with spray paint. This will serve as your guide.

To begin building you’ll need a shovel, gravel, water permeable landscaping fabric, a few long nails and a perforated drainage pipe. The amount of each of these materials will depend on the depth, width and length of your drain. A standard French drain is 6 inches wide, 18-24 inches deep and about 3 feet long. (Keep in mind that you’ll need to dig deep enough to place the tubing so that the finished product doesn’t lie above your foundation.)

Once your trench is completed, spread about 3 inches of gravel along the bottom of the trench. Next, lay the landscaping fabric over the fabric, with about 10 inches of excess on either side of your trench. At this point, pin the fabric on either side with nails so that it will not move when you’re placing the drainage pipe and gravel. While some people don’t bother with using fabric, without it, your drain will fill with soil and clog over time.

Now you’re ready to lay your drain pipe and cover completely with more gravel. You’ll need to leave about 5 inches between the top of the gravel and the ground surface. Fold the fabric over the tubing and gravel, overlapping like you’re wrapping a present. Then fill the trench back in with soil. Depending on the location of your drain, you may wish to top the soil with sod. To further assist with drainage, create a bed of stones at the end of the drain pipe.

And voila, your new drainage system is ready to go!


Have more questions? Call us—we’d love to help! Call the professionals at Go Green Plumbing at 336-252-2999 for service 7 days a week/24 hours a day. If water runs through it – We Do It!








Installing A French Drain (Part One)


Have you discovered standing water around your foundation or do you have a leaky basement? Then you may want to consider installing a French drain on your property. By helping keep water away from your foundation and your basement, a french drain can be an essential tool in keeping your home free of water and mold. Though it may sound intimidating, installing a French drain is a relatively easy project that can make a big impact.

First and foremost, identify the best location for your drain. This is a critical first step, so don’t rush it. Your location can make or break the success and life of your drain. So grab your pen and paper for some tips to get you moving in the right direction.

Call your homeowner’s association and city or county officials to make sure you know your neighborhood’s regulations for digging. Once you’ve received the green light from the municipal powers that be, the next step is to check for underground cables, pipes or other installations.

Each home in the US has a network of pipes and cables underground that provide water, sewer, gas, electric and communications services. If you unknowingly dig in a location that has a cable or pipe below, you can damage your utilities, costing unnecessary expense, hassle and even serious injury. To help you with this process, call 811 (“Call Before You Dig”), which is a free resource that will connect you to a local call center. There they will have a record of utility cables, etc. that are underground on your property.

Now that you know where you can dig, you’ll need to identify the most effective place to install the drain. First, look for an area that has a slight slope that runs away from your home and is free of shrubs, trees or structures of any type. Also keep in mind the most effective drains are at least 3 feet long and run parallel to your home and horizontally down your slope.

Now that you’ve identified the ideal location for your French drain, come back later this week to learn how to build your own French drain.


Have more questions? Call us—we’d love to help! Call the professionals at Go Green Plumbing at 336-252-2999 for service 7 days a week/24 hours a day. If water runs through it – We Do It!